How to Apply Stickers & Decals: Pro Tips

Q1: How do I apply the stickers?

Applying your stickers is quick and easy:

1. Clean the surface – Make sure it’s dry, smooth, and free of dust or grease.
2. Peel the sticker carefully – Remove it slowly to avoid tearing.
3. Position and stick – Place it where you want it and press firmly.
4. Smooth out bubbles – Use your fingers or a flat edge to remove any air pockets.

Q2: How do I apply the self-adhesive decals?

1. Thoroughly clean the surface and allow to fully dry. Do not use harsh chemicals. Alcohol wipes is advised.
2. Carefully peel away the backing paper ensuring the decal sticks entirely to the clear tape.
3. Align the decal and carefully place on the surface.
4. Use a hard card to smooth the label over the surface -middle towards the edge.
5. Carefully peel away the clear tape from the corner. Use your hand to press the decal firmly to ensure it sticks properly
6. Allow 48-72 hours for the adhesive to sure and adhere to the surface before getting in contact with water.

Q3: How do I apply the iron-on decals?

1. Set iron to cotton setting. No steam.
2. Place fabric on a hard, flat surface. Ironing board is not recommended. Preheat fabric for 5 seconds to remove moisture and wrinkles.
3. Remove the decal from the parchment paper and position on the fabric. Place the parchment paper on top.
4. Place the iron firmly for 20 seconds on the entire design. For large designs, 10 seconds for each section. For canvas, iron for 30 seconds.
5. Remove the parchment paper and peel away the clear carrier.
6. If the decal doesn't peel away from the clear carrier put back the parchment paper and iron throughout the design with even pressure.
7. Remove the parchment paper and peel away the clear carrier. Cover with the parchment paper again and slightly move the iron throughout the entire design for 15 seconds. 30 seconds for canvas.

Q4: Need Assistance?

For any questions, email us at: 📧 suniloelcreations@gmail.com. Response time: 24–48 hours, Monday–Friday.